Considering an ECU remap for your Nissan NV400 2.3 DCi 100hp? A Stage 1 remap can take this 2010 - 2016 diesel engine from 100 BHP to 130 BHP and from 285 Nm to 345 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan NV400 can achieve.
The Nissan NV400 2.3 DCi 100hp is a 2.3L turbocharged diesel engine producing 100 BHP and 285 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 345 Nm — a gain of around 30 BHP (30%) and 60 Nm (21%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.3 DCi 125hp | 125 → 155 | +30 | 310 → 370 | +60 | Excellent (8/10) |
| 2.3 DCi 150hp | 150 → 180 | +30 | 350 → 410 | +60 | Good (7/10) |
Get a personalised remap quote for your Nissan NV400. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
