Considering an ECU remap for your Nissan X-Trail 2.0 DCi 177hp? A Stage 1 remap can take this 2014 - 2017 diesel engine from 177 BHP to 205 BHP and from 380 Nm to 440 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan X-Trail can achieve.
The Nissan X-Trail 2.0 DCi 177hp is a 2.0L turbocharged diesel engine producing 177 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 440 Nm — a gain of around 28 BHP (16%) and 60 Nm (16%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 DCi 130hp | 130 → 155 | +25 | 320 → 370 | +50 | Good (7/10) |
| 1.6 DIG-T 163hp | 163 → 190 | +27 | 240 → 290 | +50 | Good (7/10) |
Get a personalised remap quote for your Nissan X-Trail. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
