Considering an ECU remap for your Nissan X-Trail 1.6 DCi 130hp? A Stage 1 remap can take this 2018 -> diesel engine from 130 BHP to 155 BHP and from 320 Nm to 370 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan X-Trail can achieve.
The Nissan X-Trail 1.6 DCi 130hp is a 1.6L turbocharged diesel engine producing 130 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 370 Nm — a gain of around 25 BHP (19%) and 50 Nm (16%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.7 dCi 150hp | 150 → 180 | +30 | 340 → 380 | +40 | Good (7/10) |
| 1.3 DIG-T 160hp | 160 → 165 | +5 | 270 → 300 | +30 | Moderate (5.5/10) |
| 1.6 DIG-T 163hp | 163 → 190 | +27 | 240 → 290 | +50 | Good (7/10) |
| 2.0 DCi 177hp | 177 → 205 | +28 | 380 → 440 | +60 | Good (7/10) |
Get a personalised remap quote for your Nissan X-Trail. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
