Opel Insignia 2.8 V6 Turbo 260hp Remap

The Opel Insignia 2.8 V6 Turbo 260hp is a 2.8L turbocharged petrol engine producing 260 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 450 Nm — a gain of around 50 BHP (19%) and 100 Nm (29%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.