Considering an ECU remap for your Opel Movano 2.3 CDTi 150hp? A Stage 1 remap can take this 2019 - 2020 diesel engine from 150 BHP to 210 BHP and from 385 Nm to 480 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Movano can achieve.
The Opel Movano 2.3 CDTi 150hp is a 2.3L turbocharged diesel engine producing 150 BHP and 385 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 480 Nm — a gain of around 60 BHP (40%) and 95 Nm (25%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.3 CDTi 135hp | 135 → 210 | +75 | 310 → 480 | +170 | Excellent (8/10) |
| 2.3 CDTi 180hp | 180 → 210 | +30 | 400 → 480 | +80 | Good (7/10) |
Get a personalised remap quote for your Opel Movano. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
