Considering an ECU remap for your Opel Movano 2.3 CDTi 146hp? A Stage 1 remap can take this (B) - 2010 - 2014 diesel engine from 146 BHP to 180 BHP and from 350 Nm to 430 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Movano can achieve.
The Opel Movano 2.3 CDTi 146hp is a 2.3L turbocharged diesel engine producing 146 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 430 Nm — a gain of around 34 BHP (23%) and 80 Nm (23%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.3 CDTi 100hp | 100 → 155 | +55 | 285 → 385 | +100 | Excellent (8.5/10) |
| 2.3 CDTi 125hp | 125 → 155 | +30 | 310 → 385 | +75 | Excellent (8/10) |
Get a personalised remap quote for your Opel Movano. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
