Opel Vivaro 2.5 CDTi 145hp Remap

The Opel Vivaro 2.5 CDTi 145hp is a 2.5L turbocharged diesel engine producing 145 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 172 BHP and 405 Nm — a gain of around 27 BHP (19%) and 85 Nm (27%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.