Peugeot 607 3.0 HDiF 240hp Remap

Name: Peugeot 607 3.0 HDiF 240hp ECU Remap
Brand: Peugeot

Expected gains of +50 BHP and +50 Nm torque

Get Your Free Quote ↓

BHP+50 hp (21%)

Standard

240 hp

Tuned

290 hp

Torque+50 Nm (11%)

Standard

450 Nm

Tuned

500 Nm

Suitability

Good (7/10)

Gains Profile

Power-focused

Headroom

Medium

Peugeot 607 3.0 HDiF 240hp ECU Remapping

Considering an ECU remap for your Peugeot 607 3.0 HDiF 240hp? A Stage 1 remap can take this All diesel engine from 240 BHP to 290 BHP and from 450 Nm to 500 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 607 can achieve.

How this engine compares

1stof 8 Peugeot 607 engines by power gain
76%of the 9,842 engines we hold gain data for see a smaller power increase
27%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Peugeot 607 3.0 HDiF 240hp is a 3.0L turbocharged diesel engine producing 240 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 500 Nm — a gain of around 50 BHP (21%) and 50 Nm (11%).

This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Considerations

!High tuned torque: check transmission torque capacity and service history.

Other 607 All Engines

Engine	BHP	Gain	Torque

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 3L
Capacity: 2992 CC
Type: Car
Engine Family: Peugeot 3.0L Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC17-era diesel ECU (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Peugeot 607. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakePeugeot

Model607

GenerationAll

Engine3.0 HDiF 240hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.

2.0 HDi 110hp	110 → 145	+35	250 → 300	+50	Excellent (8/10)
2.0 HDi 136hp	136 → 166	+30	320 → 380	+60	Excellent (8/10)
2.2 HDiF 136hp	136 → 170	+34	314 → 400	+86	Good (7.5/10)
2.0i 16v 138hp	138 → 148	+10	190 → 205	+15	Moderate (4/10)
2.2 HDi 170hp	170 → 210	+40	370 → 440	+70	Good (7.5/10)
2.7 HDiF 204hp	204 → 240	+36	440 → 520	+80	Good (7/10)
3.0i V6 210hp	210 → 223	+13	285 → 305	+20	Moderate (4/10)