Considering an ECU remap for your Pontiac Firebird 3.8 V6 200hp? A Stage 1 remap can take this 1997 - 2002 petrol engine from 200 BHP to 220 BHP and from 305 Nm to 325 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Pontiac Firebird can achieve.
The Pontiac Firebird 3.8 V6 200hp is a 3.8L naturally aspirated petrol engine producing 200 BHP and 305 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 325 Nm — a gain of around 20 BHP (10%) and 20 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 5.7 V8 310hp | 310 → 330 | +20 | 461 → 485 | +24 | Limited (3.5/10) |
Get a personalised remap quote for your Pontiac Firebird. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
