Porsche Macan 2.9 S 380hp Remap

The Porsche Macan 2.9 S 380hp is a 2.9L naturally aspirated petrol engine producing 380 BHP and 520 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 510 BHP and 730 Nm — a gain of around 130 BHP (34%) and 210 Nm (40%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.