Considering an ECU remap for your Renault Trucks Kerax 361hp? A Stage 1 remap can take this All diesel engine from 361 BHP to 421 BHP and from 1210 Nm to 1600 Nm of torque (naturally aspirated). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Trucks Kerax can achieve.
The Renault Trucks Kerax 361hp is a naturally aspirated unknown fuel type engine producing 361 BHP and 1210 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 421 BHP and 1600 Nm — a gain of around 60 BHP (17%) and 390 Nm (32%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 215hp | 215 → 258 | +43 | 700 → 950 | +250 | Moderate (5.5/10) |
| 265hp | 265 → 315 | +50 | 900 → 1230 | +330 | Moderate (5.5/10) |
| 370 DXI-11 | 370 → 445 | +75 | 1735 → 2090 | +355 | Moderate (5.5/10) |
| 410 DXI-11 | 410 → 490 | +80 | 1900 → 2280 | +380 | Moderate (5/10) |
| 412hp | 412 → 490 | +78 | 1870 → 2300 | +430 | Moderate (5.5/10) |
| 450 DXI-11 | 449 → 538 | +89 | 2140 → 2568 | +428 | Good (7/10) |
Get a personalised remap quote for your Renault Trucks Kerax. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
