Expected gains of +100 BHP and +400 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Renault Trucks T-Series 440 - DTI13 - 440hp? A Stage 1 remap can take this All diesel engine from 440 BHP to 540 BHP and from 2200 Nm to 2600 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Trucks T-Series can achieve.
The Renault Trucks T-Series 440 - DTI13 - 440hp is a turbocharged diesel engine producing 440 BHP and 2200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 540 BHP and 2600 Nm — a gain of around 100 BHP (23%) and 400 Nm (18%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 460 - DTI11 - 460hp | 460 → 529 | +69 | 2200 → 2596 | +396 | Good (7/10) |
Get a personalised remap quote for your Renault Trucks T-Series. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.