Considering an ECU remap for your Renault Alaskan 2.3 dCi 190hp? A Stage 1 remap can take this 2017 -> diesel engine from 190 BHP to 210 BHP and from 450 Nm to 500 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Alaskan can achieve.
The Renault Alaskan 2.3 dCi 190hp is a 2.3L turbocharged diesel engine producing 190 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 500 Nm — a gain of around 20 BHP (11%) and 50 Nm (11%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.3 dCi 160hp | 160 → 190 | +30 | 403 → 460 | +57 | Good (7/10) |
Get a personalised remap quote for your Renault Alaskan. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
