Considering an ECU remap for your Renault Master 2.3 DCI 150hp? A Stage 1 remap can take this Mk3 - 2010 - 2014 diesel engine from 150 BHP to 180 BHP and from 350 Nm to 410 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Master can achieve.
The Renault Master 2.3 DCI 150hp is a 2.3L turbocharged diesel engine producing 150 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 410 Nm — a gain of around 30 BHP (20%) and 60 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.3 DCI 100hp | 100 → 155 | +55 | 285 → 430 | +145 | Excellent (8/10) |
| 2.3 DCI 125hp | 125 → 155 | +30 | 310 → 430 | +120 | Excellent (8/10) |
| 2.3 DCI 146hp | 146 → 180 | +34 | 350 → 410 | +60 | Good (7.5/10) |
Get a personalised remap quote for your Renault Master. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
