Considering an ECU remap for your Renault Maxity 2.5 DCi 136hp? A Stage 1 remap can take this -> 2015 diesel engine from 136 BHP to 160 BHP and from 270 Nm to 340 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Maxity can achieve.
The Renault Maxity 2.5 DCi 136hp is a 2.5L turbocharged diesel engine producing 136 BHP and 270 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 340 Nm — a gain of around 24 BHP (18%) and 70 Nm (26%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.5 DCi 110hp | 110 → 160 | +50 | 340 → 340 | +0 | Excellent (8/10) |
| 2.5 DCi 130hp | 130 → 160 | +30 | 270 → 340 | +70 | Good (7.5/10) |
| 3.0 DCi 150hp | 150 → 180 | +30 | 350 → 410 | +60 | Good (7/10) |
Get a personalised remap quote for your Renault Maxity. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
