Considering an ECU remap for your Renault Twingo 1.0 SCe 73hp? A Stage 1 remap can take this III - 2019 -> petrol engine from 73 BHP to 77 BHP and from 95 Nm to 121 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Twingo can achieve.
The Renault Twingo 1.0 SCe 73hp is a 1.0L naturally aspirated petrol engine producing 73 BHP and 95 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 77 BHP and 121 Nm — a gain of around 4 BHP (5%) and 26 Nm (27%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.0 SCe 65hp | 65 → 77 | +12 |
| 95 → 121 |
| +26 |
| Moderate (5.5/10) |
| 0.9 TCe 92hp | 92 → 110 | +18 | 135 → 160 | +25 | Good (7/10) |
Get a personalised remap quote for your Renault Twingo. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
