Considering an ECU remap for your Renault Wind 1.6i 133hp? A Stage 1 remap can take this 2010 -> petrol engine from 133 BHP to 145 BHP and from 160 Nm to 180 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Wind can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Renault Wind 1.6i 133hp is a 1.6L naturally aspirated petrol engine producing 133 BHP and 160 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 180 Nm — a gain of around 12 BHP (9%) and 20 Nm (12%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 1.2 TCE 100hp | 100 → 122 | +22 | 152 → 195 | +43 | Good (7.5/10) |
Get a personalised remap quote for your Renault Wind. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
