Considering an ECU remap for your Roewe 550 1.8i 130hp? A Stage 1 remap can take this 2008 - > petrol engine from 130 BHP to 140 BHP and from 168 Nm to 185 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Roewe 550 can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Roewe 550 1.8i 130hp is a 1.8L naturally aspirated petrol engine producing 130 BHP and 168 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 185 Nm — a gain of around 10 BHP (8%) and 17 Nm (10%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 1.8T 160hp | 160 → 190 | +30 | 215 → 285 | +70 | Good (7.5/10) |
Get a personalised remap quote for your Roewe 550. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
