Expected gains of +67 BHP and +155 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Rolls Royce Wraith 6.6 V12 633hp? A Stage 1 remap can take this All petrol engine from 633 BHP to 700 BHP and from 795 Nm to 950 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Rolls Royce Wraith can achieve.
The Rolls Royce Wraith 6.6 V12 633hp is a 6.6L naturally aspirated petrol engine producing 633 BHP and 795 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 700 BHP and 950 Nm — a gain of around 67 BHP (11%) and 155 Nm (19%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Rolls Royce Wraith. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.