Considering an ECU remap for your Seat Toledo 2.0 FSI 150hp? A Stage 1 remap can take this 2004 - 2009 petrol engine from 150 BHP to 160 BHP and from 200 Nm to 215 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Toledo can achieve.
The Seat Toledo 2.0 FSI 150hp is a 2.0L naturally aspirated petrol engine producing 150 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 215 Nm — a gain of around 10 BHP (7%) and 15 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6i 8v 102hp | 102 → 112 | +10 | 148 → 165 | +17 | Moderate (4.5/10) |
| 1.9 TDI 105hp | 105 → 140 | +35 | 250 → 320 | +70 | Excellent (8/10) |
| 2.0 TDI 140hp | 140 → 175 | +35 | 320 → 395 | +75 | Good (7.5/10) |
| 1.8 TSI 160hp | 160 → 210 | +50 | 250 → 340 | +90 | Excellent (8/10) |
Get a personalised remap quote for your Seat Toledo. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
