Considering an ECU remap for your Skoda Kamiq 1.5 TSi 150hp? A Stage 1 remap can take this 2019 -> petrol engine from 150 BHP to 180 BHP and from 250 Nm to 335 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Skoda Kamiq can achieve.
The Skoda Kamiq 1.5 TSi 150hp is a 1.5L turbocharged petrol engine producing 150 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 335 Nm — a gain of around 30 BHP (20%) and 85 Nm (34%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.0 TSi 95hp | 95 → 140 | +45 | 175 → 240 |
| +65 |
| Excellent (8/10) |
| 1.0 TSi 115hp | 115 → 140 | +25 | 200 → 240 | +40 | Good (7.5/10) |
| 1.6 TDI 115hp | 115 → 145 | +30 | 250 → 310 | +60 | Excellent (8/10) |
Get a personalised remap quote for your Skoda Kamiq. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
