Expected gains of +42 BHP and +60 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your SsangYong Korando 2.2 e-XDI 178hp? A Stage 1 remap can take this 2011 - 2018 diesel engine from 178 BHP to 220 BHP and from 400 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your SsangYong Korando can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The SsangYong Korando 2.2 e-XDI 178hp is a 2.2L turbocharged diesel engine producing 178 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 460 Nm — a gain of around 42 BHP (24%) and 60 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 2.0 XDi 150hp | 150 → 195 | +45 | 360 → 450 | +90 | Good (7.5/10) |
| 2.0 XDi 175hp | 175 → 200 | +25 | 360 → 420 | +60 | Good (7/10) |
Get a personalised remap quote for your SsangYong Korando. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.