Considering an ECU remap for your SsangYong Kyron 200 XDi 141hp? A Stage 1 remap can take this All diesel engine from 141 BHP to 170 BHP and from 310 Nm to 370 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your SsangYong Kyron can achieve.
The SsangYong Kyron 200 XDi 141hp is a 2.0L turbocharged diesel engine producing 141 BHP and 310 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 170 BHP and 370 Nm — a gain of around 29 BHP (21%) and 60 Nm (19%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 270 XDi 165hp | 165 → 185 | +20 | 345 → 420 | +75 | Good (7/10) |
Get a personalised remap quote for your SsangYong Kyron. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
