Expected gains of +39 BHP and +40 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your SsangYong Musso 2.2 e-XDi 181hp? A Stage 1 remap can take this 2018 - 2020 diesel engine from 181 BHP to 220 BHP and from 420 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your SsangYong Musso can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The SsangYong Musso 2.2 e-XDi 181hp is a 2.2L turbocharged diesel engine producing 181 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 460 Nm — a gain of around 39 BHP (22%) and 40 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your SsangYong Musso. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.