Considering an ECU remap for your SsangYong XLV 1.6 e-XDI 115hp? A Stage 1 remap can take this 2016 -> diesel engine from 115 BHP to 140 BHP and from 300 Nm to 350 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your SsangYong XLV can achieve.
The SsangYong XLV 1.6 e-XDI 115hp is a 1.6L turbocharged diesel engine producing 115 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 350 Nm — a gain of around 25 BHP (22%) and 50 Nm (17%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your SsangYong XLV. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
