Considering an ECU remap for your Subaru Forester 2.0 XT 240hp? A Stage 1 remap can take this 2008 - 2017 petrol engine from 240 BHP to 270 BHP and from 350 Nm to 410 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru Forester can achieve.
The Subaru Forester 2.0 XT 240hp is a 2.0L naturally aspirated petrol engine producing 240 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 270 BHP and 410 Nm — a gain of around 30 BHP (12%) and 60 Nm (17%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 D boxer 147hp | 147 → 177 | +30 | 350 → 410 | +60 | Good (6.5/10) |
| 2.5 Turbo 230hp | 230 → 270 | +40 | 320 → 380 | +60 | Good (7/10) |
Get a personalised remap quote for your Subaru Forester. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
