Considering an ECU remap for your Subaru Levorg 2.0 GT-S 268hp? A Stage 1 remap can take this 2015 - 2019 petrol engine from 268 BHP to 300 BHP and from 350 Nm to 400 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru Levorg can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Subaru Levorg 2.0 GT-S 268hp is a 2.0L naturally aspirated petrol engine producing 268 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 400 Nm — a gain of around 32 BHP (12%) and 50 Nm (14%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 2.0 GT 150hp | 150 → 164 | +14 | 198 → 220 | +22 | Moderate (4.5/10) |
| 1.6T GT 170hp | 170 → 190 | +20 | 250 → 300 | +50 | Good (7/10) |
Get a personalised remap quote for your Subaru Levorg. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
