Suzuki Baleno 1.0 Boosterjet 112hp Remap

The Suzuki Baleno 1.0 Boosterjet 112hp is a 1.0L naturally aspirated petrol engine producing 112 BHP and 170 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 230 Nm — a gain of around 18 BHP (16%) and 60 Nm (35%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.