Considering an ECU remap for your Toyota Alphard 3.0i V6 220hp? A Stage 1 remap can take this 2002 - 2008 petrol engine from 220 BHP to 235 BHP and from 328 Nm to 354 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Alphard can achieve.
The Toyota Alphard 3.0i V6 220hp is a 3.0L naturally aspirated petrol engine producing 220 BHP and 328 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 235 BHP and 354 Nm — a gain of around 15 BHP (7%) and 26 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.4i 160hp | 160 → 179 | +19 | 220 → 245 | +25 | Moderate (4.5/10) |
Get a personalised remap quote for your Toyota Alphard. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
