Considering an ECU remap for your Toyota Fortuner 2.8d 177hp? A Stage 1 remap can take this 2015 - 2019 diesel engine from 177 BHP to 207 BHP and from 420 Nm to 520 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Fortuner can achieve.
The Toyota Fortuner 2.8d 177hp is a 2.8L turbocharged diesel engine producing 177 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 207 BHP and 520 Nm — a gain of around 30 BHP (17%) and 100 Nm (24%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.4d 150hp | 150 → 185 | +35 | 400 → 460 | +60 | Good (7/10) |
| 4.0i V6 238hp | 238 → 260 | +22 | 376 → 400 | +24 | Moderate (4/10) |
Get a personalised remap quote for your Toyota Fortuner. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
