Considering an ECU remap for your Toyota Hilux 2.8d 204hp? A Stage 1 remap can take this 2020 - 2024 diesel engine from 204 BHP to 225 BHP and from 500 Nm to 550 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Hilux can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Toyota Hilux 2.8d 204hp is a 2.8L turbocharged diesel engine producing 204 BHP and 500 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 550 Nm — a gain of around 21 BHP (10%) and 50 Nm (10%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 2.4d 150hp | 150 → 185 | +35 | 400 → 460 | +60 | Good (7/10) |
Get a personalised remap quote for your Toyota Hilux. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
