Expected gains of +31 BHP and +100 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Toyota Landcruiser 2.8d 204hp? A Stage 1 remap can take this 2024 -> ... diesel mhev engine from 204 BHP to 235 BHP and from 500 Nm to 600 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Landcruiser can achieve.
The Toyota Landcruiser 2.8d 204hp is a 2.8L naturally aspirated diesel mhev engine producing 204 BHP and 500 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 235 BHP and 600 Nm — a gain of around 31 BHP (15%) and 100 Nm (20%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Toyota Landcruiser. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.