Considering an ECU remap for your Toyota Rav4 2.0 VVT-i 152hp? A Stage 1 remap can take this 2016 -> petrol engine from 152 BHP to 167 BHP and from 195 Nm to 221 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Rav4 can achieve.
The Toyota Rav4 2.0 VVT-i 152hp is a 2.0L naturally aspirated petrol engine producing 152 BHP and 195 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 167 BHP and 221 Nm — a gain of around 15 BHP (10%) and 26 Nm (13%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 D4D 143hp | 143 → 190 | +47 | 320 → 400 | +80 | Excellent (8/10) |
| 2.0i 175hp | 175 → 185 | +10 | 208 → 225 | +17 | Moderate (4/10) |
Get a personalised remap quote for your Toyota Rav4. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
