Considering an ECU remap for your Toyota Tacoma 4.0i V6 236hp? A Stage 1 remap can take this 2005 - 2015 petrol engine from 236 BHP to 255 BHP and from 361 Nm to 394 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Tacoma can achieve.
The Toyota Tacoma 4.0i V6 236hp is a 4.0L naturally aspirated petrol engine producing 236 BHP and 361 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 255 BHP and 394 Nm — a gain of around 19 BHP (8%) and 33 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.7i 159hp | 159 → 187 | +28 | 244 → 271 | +27 | Moderate (4.5/10) |
Get a personalised remap quote for your Toyota Tacoma. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
