Expected gains of +16 BHP and +30 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Vauxhall Antara 2.2 CDTi 184hp? A Stage 1 remap can take this 2011 - 2013 diesel engine from 184 BHP to 200 BHP and from 400 Nm to 430 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Vauxhall Antara can achieve.
The Vauxhall Antara 2.2 CDTi 184hp is a 2.2L turbocharged diesel engine producing 184 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 430 Nm — a gain of around 16 BHP (9%) and 30 Nm (8%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 CDTi 163hp | 163 → 200 | +37 | 350 → 430 | +80 | Good (7.5/10) |
| 2.0 CDTi 170hp |
| 170 → 195 |
| +25 |
| 400 → 450 |
| +50 |
| Good (6.5/10) |
Get a personalised remap quote for your Vauxhall Antara. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.