Considering an ECU remap for your Vauxhall Mokka 1.7 CDTi 130hp? A Stage 1 remap can take this 2012 - 2016 diesel engine from 130 BHP to 160 BHP and from 300 Nm to 350 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Vauxhall Mokka can achieve.
The Vauxhall Mokka 1.7 CDTi 130hp is a 1.7L turbocharged diesel engine producing 130 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 350 Nm — a gain of around 30 BHP (23%) and 50 Nm (17%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 CDTi 110hp | 110 → 140 | +30 | 300 → 360 | +60 | Excellent (8/10) |
| 1.6i 115hp | 115 → 125 | +10 | 155 → 170 | +15 |
| 1.6 CDTI 136hp | 136 → 160 | +24 | 320 → 380 | +60 | Good (7/10) |
| 1.4 Turbo 140hp | 140 → 165 | +25 | 200 → 265 | +65 | Good (7.5/10) |
Get a personalised remap quote for your Vauxhall Mokka. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
