Considering an ECU remap for your Vauxhall Mokka 1.5 CDTi 100hp? A Stage 1 remap can take this 2020 -> ... diesel engine from 100 BHP to 145 BHP and from 250 Nm to 300 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Vauxhall Mokka can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Vauxhall Mokka 1.5 CDTi 100hp is a 1.5L turbocharged diesel engine producing 100 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 300 Nm — a gain of around 45 BHP (45%) and 50 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.2T 110hp | 110 → 150 | +40 |
| 205 → 270 |
| +65 |
| Excellent (8/10) |
| 1.2T 130hp | 130 → 150 | +20 | 230 → 270 | +40 | Good (7/10) |
Get a personalised remap quote for your Vauxhall Mokka. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
