Considering an ECU remap for your Volkswagen Atlas 3.6 V6 276hp? A Stage 1 remap can take this 2020 -> petrol engine from 276 BHP to 299 BHP and from 361 Nm to 385 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volkswagen Atlas can achieve.
The Volkswagen Atlas 3.6 V6 276hp is a 3.6L naturally aspirated petrol engine producing 276 BHP and 361 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 299 BHP and 385 Nm — a gain of around 23 BHP (8%) and 24 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 TFSI 235hp | 235 → 300 | +65 | 350 → 440 | +90 | Good (7/10) |
Get a personalised remap quote for your Volkswagen Atlas. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
