Considering an ECU remap for your Volkswagen Polo 1.0 TSI 110hp? A Stage 1 remap can take this 2021 -> ... petrol engine from 110 BHP to 140 BHP and from 200 Nm to 240 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volkswagen Polo can achieve.
The Volkswagen Polo 1.0 TSI 110hp is a 1.0L turbocharged petrol engine producing 110 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 240 Nm — a gain of around 30 BHP (27%) and 40 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.0 TSI 95hp | 95 → 140 | +45 | 175 → 240 | +65 | Excellent (8/10) |
Get a personalised remap quote for your Volkswagen Polo. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
