Volkswagen Up 1.0 TSI 90hp Remap

The Volkswagen Up 1.0 TSI 90hp is a 1.0L turbocharged petrol engine producing 90 BHP and 160 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 135 BHP and 230 Nm — a gain of around 45 BHP (50%) and 70 Nm (44%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..

Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.