Considering an ECU remap for your Volvo XC90 2.0 T5 250hp? A Stage 1 remap can take this 2019 -> ... petrol engine from 250 BHP to 275 BHP and from 350 Nm to 420 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volvo XC90 can achieve.
The Volvo XC90 2.0 T5 250hp is a 2.0L naturally aspirated petrol engine producing 250 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 275 BHP and 420 Nm — a gain of around 25 BHP (10%) and 70 Nm (20%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 D5 235hp | 235 → 280 | +45 | 480 → 540 | +60 | Moderate (5/10) |
Get a personalised remap quote for your Volvo XC90. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
