Audi Q5 45 TFSI (2.0T) 265hp Remap

The Audi Q5 45 TFSI (2.0T) 265hp is a 2.0L turbocharged petrol mhev engine producing 265 BHP and 370 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 440 Nm — a gain of around 25 BHP (9%) and 70 Nm (19%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited..

Considerations: High tuned torque: check transmission torque capacity and service history.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.