Considering an ECU remap for your Audi Q7 50 TDI 286hp? A Stage 1 remap can take this 4M MK1 - 2015 - 2018 diesel engine from 286 BHP to 345 BHP and from 620 Nm to 710 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q7 can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Audi Q7 50 TDI 286hp is a 3.0L turbocharged diesel engine producing 286 BHP and 620 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 345 BHP and 710 Nm — a gain of around 59 BHP (21%) and 90 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is a Bosch EDC17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.0 TDI CR 211hp | 211 → 310 | +99 | 500 → 680 | +180 | Excellent (8/10) |
| 3.0 TDI CR 218hp | 218 → 310 | +92 | 500 → 700 | +200 | Excellent (8/10) |
| 45 TDI 231hp | 231 → 350 | +119 | 500 → 720 | +220 | Excellent (8/10) |
| 3.0 TDI CR 249hp | 249 → 310 | +61 | 600 → 680 | +80 | Good (7/10) |
| 2.0 TFSI 252hp | 252 → 300 | +48 | 370 → 440 | +70 | Good (6.5/10) |
| 3.0 TDI CR 272hp | 272 → 320 | +48 | 600 → 680 | +80 | Good (7/10) |
| 3.0 TFSI 333hp | 333 → 400 | +67 | 440 → 520 | +80 | Good (6.5/10) |
| 3.0 TDI E-Tron 373hp | 373 → 435 | +62 | 700 → 810 | +110 | Good (7/10) |
Get a personalised remap quote for your Audi Q7. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
