Considering an ECU remap for your Cadillac ATS 2.5i - 202hp? A Stage 1 remap can take this 2013 -> petrol engine from 202 BHP to 225 BHP and from 259 Nm to 280 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac ATS can achieve.
The Cadillac ATS 2.5i - 202hp is a 2.5L naturally aspirated petrol engine producing 202 BHP and 259 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 280 Nm — a gain of around 23 BHP (11%) and 21 Nm (8%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 Turbo 276hp | 276 → 300 | +24 | 353 → 450 | +97 | Good (6.5/10) |
| 3.6 V6 321hp | 321 → 350 | +29 | 358 → 380 | +22 | Moderate (4/10) |
| 3.6 V6 335hp | 335 → 350 | +15 | 386 → 400 | +14 | Limited (3.5/10) |
| 3.6 V6 480hp | 480 → 510 | +30 | 600 → 660 | +60 | Limited (3.5/10) |
Get a personalised remap quote for your Cadillac ATS. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
