Expected gains of +20 BHP and +26 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Chevrolet Avalanche 5.3 V8 320hp? A Stage 1 remap can take this 2007 - 2013 petrol engine from 320 BHP to 340 BHP and from 454 Nm to 480 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Avalanche can achieve.
The Chevrolet Avalanche 5.3 V8 320hp is a 5.3L naturally aspirated petrol engine producing 320 BHP and 454 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 340 BHP and 480 Nm — a gain of around 20 BHP (6%) and 26 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 6.0 V8 366hp | 366 → 386 | +20 | 510 → 540 | +30 | Limited (3.5/10) |
Get a personalised remap quote for your Chevrolet Avalanche. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.