Expected gains of +20 BHP and +30 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Chevrolet Avalanche 6.0 V8 366hp? A Stage 1 remap can take this 2007 - 2013 petrol engine from 366 BHP to 386 BHP and from 510 Nm to 540 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Avalanche can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Chevrolet Avalanche 6.0 V8 366hp is a 6.0L naturally aspirated petrol engine producing 366 BHP and 510 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 386 BHP and 540 Nm — a gain of around 20 BHP (5%) and 30 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine |
|---|
| BHP |
|---|
| Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 5.3 V8 320hp | 320 → 340 | +20 | 454 → 480 | +26 | Limited (3.5/10) |
Get a personalised remap quote for your Chevrolet Avalanche. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.