Considering an ECU remap for your Chevrolet Orlando 2.0D 163hp? A Stage 1 remap can take this 2011 - 2018 diesel engine from 163 BHP to 200 BHP and from 360 Nm to 420 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Orlando can achieve.
The Chevrolet Orlando 2.0D 163hp is a 2.0L turbocharged diesel engine producing 163 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 420 Nm — a gain of around 37 BHP (23%) and 60 Nm (17%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0D 130hp | 130 → 160 | +30 | 315 → 380 | +65 | Excellent (8/10) |
| 1.4 Turbo 140hp | 140 → 170 | +30 | 200 → 260 | +60 | Good (7.5/10) |
Get a personalised remap quote for your Chevrolet Orlando. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
