Considering an ECU remap for your Chrysler 300C 3.6 V6 292hp? A Stage 1 remap can take this 2011 -> petrol engine from 292 BHP to 310 BHP and from 350 Nm to 370 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler 300C can achieve.
The Chrysler 300C 3.6 V6 292hp is a 3.6L naturally aspirated petrol engine producing 292 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 370 Nm — a gain of around 18 BHP (6%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 5.7 Hemi V8 363hp | 363 → 385 | +22 | 534 → 555 | +21 | Limited (3/10) |
| 475 → 495 |
| +20 |
| 637 → 655 |
| +18 |
| Limited (3/10) |
Get a personalised remap quote for your Chrysler 300C. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
