Cupra Formentor VZ5 2.5 TFSI 390hp Remap

The Cupra Formentor VZ5 2.5 TFSI 390hp is a 2.5L turbocharged petrol engine producing 390 BHP and 480 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 470 BHP and 620 Nm — a gain of around 80 BHP (21%) and 140 Nm (29%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.