Considering an ECU remap for your Dacia Sandero 1.0i SCe 67hp? A Stage 1 remap can take this 2021 -> petrol engine from 67 BHP to 73 BHP and from 95 Nm to 105 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dacia Sandero can achieve.
The Dacia Sandero 1.0i SCe 67hp is a 1.0L naturally aspirated petrol engine producing 67 BHP and 95 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 73 BHP and 105 Nm — a gain of around 6 BHP (9%) and 10 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| TCe 90 90hp | 90 → 110 | +20 | 160 → 210 | +50 | Good (7.5/10) |
| 100 → 115 |
| +15 |
| 170 → 200 |
| +30 |
| Good (7/10) |
Get a personalised remap quote for your Dacia Sandero. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
